How to clean the tile or ceramic joint

In this article, we will tell you how to clean the tile or ceramic mortar in the bathroom or kitchen. According to experts, we should stay at home to avoid contracting the coronavirus. So what could be more obvious than taking the time carry out small repairs or a thorough cleaning which we always delegate when we have time.

One of the most common and attractive ways to protect the wall from moisture and grease build-up is to attach tiles or ceramic tiles. Even though we saved the wall, dirt is collecting on the surface that we want to show.

But don’t despair How to clean ceramic tiles and grout is really easy, though You are using the products we recommend.

The joints or joints have the task of holding the coverings together and thus filling the voids remaining between the ceramic or the tile. They tend to be yellowish or moldy if not cleaned frequently with a disinfectant.

This happens because they are made of a completely different material. which attracts more dirt and mold in damp areas. That is why we are going to show you how to clean the seal.

Even when we clean the tiles or ceramic tiles in the bathroom or in the kitchen, the joints are usually darker or moldy. In this case, more thorough cleaning is required. In this article, we’ll tell you how to clean tile grout the most effective products to get flawless again.

Why is it necessary to clean ceramic tiles or grout?

Appearance is one of the main reasons for using the ceramic tile and grout cleaning method. But there is a more important reason, and that is our health. The spread of fungi on kitchen and bathroom walls is hazardous to health. Especially for children or asthmatics or allergy sufferers.

This mold usually appears on bathroom walls due to poor ventilation and constant humidity or water vapor. The health risk arises from in the kitchen
Accumulation of fat that encourages the spread of bacteria
. That’s why we’re here to reveal the most effective and easiest ways to clean ceramic seals and gaskets.

Here are some Ideas for kitchen cladding if you are planning to renovate that part of the house. You can find a list of interior designers who can advise you at the following link.

How do you clean tiles or ceramics?

The first step in cleaning ceramic tiles or grout is this Remove anything that hangs or rests on it. In addition to everything that’s on the counter. This way we can safely clean without worrying about the condition of other items.

With all the items removed, you can boil a saucepan of water for degreasing near the kitchen. Second, that You need to put the broom on the floor so it doesn’t get dirty or it will be filled with the water that we will use for the ceramics.

You just have to choose the most effective cleaning solution and Start cleaning from the top down. For ceramic floors, you can use a cotton cloth to avoid damaging the surface. Tiles can be cleaned with a used toothbrush that does not have very hard bristles.

In the case of parquet, it is better to sweep it and, after cleaning the tiles and ceramic joints, clean the entire wall with it a mixture of tea and hot water over the entire surface of the wood. This mixture not only helps to clean the surface, it also adds shine and cleans more thoroughly.

If you need to organize at home, you can go from a. seek advice Professional.

How do you clean a ceramic floor with ammonia?

If grease has accumulated on the tiled wall, then you can use ammonia. To do this, however, you need to protect your face with your chin and gloves. First, prepare a container with water and ammonia.

Use this powerful mixture to rub especially in the joint. When everything is clean, rinse the entire wall well and dry it with a clean towel or paper towel.

Once you have completed the grout cleaning steps and all of the walls are spotless, it is time to clean the floor to keep the entire area spotless. Because ammonia is ideal for removing all dirty dirt and grease.

The mixture should consist of equal parts water and ammonia then spread on the floor with a towel. Remember, this is very harmful to your health so you should Open the window and wear a mask and gloves.

How do I clean the tile joint with detergent?

Mix some water with washing-up liquid in a bucket and soak a sponge in it. Use the rough part to remove the dirt clinging to the tile and a brush to reinforce cleaning in the corners and joints of ceramic tile or tile. After you’ve removed the remains of the pottery you will have to Rinse with water and dry with a clean towel or paper towels.

This way the kitchen wall stays clean and you don’t need any stronger measures or products.

How do I clean the tile grout with alcohol vinegar?

White vinegar is a very effective product for disinfecting and degreasing. Besides eliminating bad odors and less harmful to health, skin and the environment. Although it has a strong odor at first, it cannot be compared to ammonia.

That is why it is one of the most effective solutions for cleaning the seal. To clean, you just need to prepare lukewarm water with white vinegar. According to the ratio of 3 water and 1 vinegar. After you’ve rubbed all of the ceramics with this mixture, rinse and dry them.

The advantage of this seal cleaning solution is that the surfaces regain their shine. In order to increase the effect, the pure product should be used undiluted so that it does not lose its acid concentration.

In the case of heavily soiled joints, the best solution for cleaning tile joints is to apply vinegar with hot water and let it work for 20 minutes.

How do I clean the tile grout with baking soda?

Baking soda is another very effective product for cleaning tile grout. Dilute baking soda in a little water and scrub all of the ceramics with a sponge to clean and disinfect the entire wall. You can add a few drops of detergent and hydrogen peroxide to this mixture.

Baking soda has antibacterial, degreasing and moisture-retaining properties, prevents mold and bacteria from spreading.

Leave on for about ten minutes and then rub vigorously with a toothbrush that you no longer use, especially on moldy joints.

The mixture of two parts alcohol vinegar and one part baking soda is ideal for cleaning silicone seals. Which can be found in sinks and other parts of the bathroom and kitchen. The method of cleaning is to spray the mixture on the grout and leave it for half an hour. Then scrub gently with a soft toothbrush and rinse with water and dry with a clean towel or paper towel.

How do I clean the tile grout with hydrogen peroxide?

Hydrogen peroxide sprayed directly onto the surface to be cleaned helps remove mold in ceramic seals. The advantage of this seal cleaning solution is that it does not produce any toxic gases. The only downside is that it can dry out the skin on your hands, so gloves are recommended when using this product.

How do I clean the tile grout with bleach?

There is no stronger bleach than bleach, but in this solution for cleaning tile grout, you need to use a chin to protect yourself from toxic gases. The same product can be used on walls, counters, furniture and floors. It is then rinsed with cold water in order not to generate any more toxic gases.

If the dirt or mold is very resistant, you can mix baking soda with bleach and leave it on the grout for a few minutes. Then rub with a brush and rinse with water.

Technological solutions for cleaning ceramic seals

High pressure steam cleaners are very powerful for cleaning ceramic tiles and joints. This solution allows you to remove dirt from less accessible corners. It is best to apply this technology with the above products.

Renew the joints

Depending on the age of the tiles or ceramics, cleaning may not be enough. So that they shine like they did on the first day, loose or heavily soiled parts of the joints can be removed with a knife. Careful enough not to damage the edge of the tile or ceramic tile.

Now apply the putty with a spatula and spread it with a sponge to make it clean and perfect. Wait for it to dry, then wipe off any dust that has built up on the tiles with a clean, dry cloth.

You can find it under the following link Reference price per bricklayer.

We hope these tile grout cleaning solutions will make it easier for you to clean and your home will look clean and sanitized for everyone.

We’ll tell you in the next article how to disinfect the whole house.